News dynamics
What are the main optical path compensation measures for laser cutting machines?
Release time:
2021-11-12 11:03
The laser cutting machine is a laser beam that focuses on the power of adult college entrance examination through the optical path system software. The laser beam irradiates the surface of the product workpiece to make the product workpiece achieve melting point or melting point. At the same time, the ultra-high pressure vapor on the coaxial line with the beam will melt or vaporize the metal material and blow it away. What are the key optical path compensation countermeasures for the cutting machine of the laser Qingdao handheld laser welding machine manufacturer?
1, the use of beam expander to carry out beam self-collimation
The beam diameter is inversely proportional to the far-field emission angle, and the larger the beam diameter, the smaller the far-field emission angle. At this stage, the beam expander is divided into refractive and double beam, and its basic principle is equivalent to an inverted telescope.
The key function is to reduce the far-field emission angle by increasing the beam diameter of the beam, thus improving the instability of the focus size and focus depth caused by the change of the length of the optical path. At this stage, there is little scientific research on the self-collimation level of the beam in China, most of which are refracted, and less discussion on double beams.
The design scheme, production, processing and adjustment of the refractive beam expander are very easy. However, because the double-beam lens is very easy to deform due to excessive temperature rise, the refractive beam expander is only suitable for light beam self-collimation of Qingdao hand-held laser welding machine manufacturers with small output power. For the high power beam self-collimation like a laser cutting machine, a double beam expander is generally used.
However, the angle of the mirror glass of the reflective beam expander cannot be determined according to the analysis method, and can only be obtained according to the linear fitting method of the standard value. Therefore, the design scheme, production and manufacture, and adjustment are very difficult. Therefore, Qingdao hand-held laser welding machine manufacturers carry out optical path compensation for the navigation optical path system software of the laser cutting machine according to the method of beam expander self-collimation of the beam, and the actual effect of Qingdao hand-held laser welding machine manufacturers is minimal.
2. Selection of variable angle spectacle lenses (VRM)
Change the pressure in the stainless steel water tank in the VRM spectacle lens according to the total input and output flow of the quantitative pump, so that the included angle of the focusing bifocal lens can be changed, thereby changing the main parameter f in the focusing equation. The variable angle lens can dynamically adjust the state parameters of the beam when the length of the optical path changes, so as to maintain the radius of the focus and the stability of the deep focus.
VRM architecture complex, relatively high cost, must be closed-loop control system, some overseas technology-leading equipment has long been selected such light path compensation countermeasures. However, China's current technical strength, it is difficult to achieve the desired application of practical results.
Related News
Principle of laser cutting machine
The principle of laser cutting machine: 1, the laser beam irradiates the surface of the workpiece, so that the processed material absorbs energy in an instant and evaporates to form a vaporization layer. The thickness of the vaporized layer is related to the power of the laser beam, and the greater the power, the thicker the vaporized layer.
The difference between fiber laser cutting machine and traditional processing
The processing speed of laser cutting pipe is very fast, which is several times or even dozens of times of traditional processing. Traditional processing (wire cutting, punching, flame cutting, etc.) is slow and cannot be delivered in time during peak periods.
How to improve the cutting efficiency of laser cutting machine?
Fiber laser cutting machine has the characteristics of high efficiency, high precision and low pollution. Compared with the traditional cutting machine, the laser cutting machine can cut metal and other materials more accurately and quickly, so how to maintain the cutting efficiency.
Application of laser cutting machine in shipbuilding industry
The continuous development of shipbuilding technology has led to major changes in shipbuilding materials and ship design. The application of laser cutting machine in shipbuilding is unique, which is closely related to the processing and application characteristics of the ship itself.